Latest activity

  • Plastic Fury
    Plastic Fury replied to the thread Trac Bars.
    I have a 2.5" lift and have removed both track bars without issue. I kept the front sway bar (with quick disconnects) as I do drive my...
  • Sufa1992
    Sufa1992 reacted to Daniel55!'s post in the thread 1992 YJ Pinion Angle with Like Like.
    7 to 11 degrees is what I’ve been told. I’m currently at 9degrees & have no problems. I’m running a 4inch lift & 35s with a Chevy...
  • zebraranger
    zebraranger replied to the thread Trac Bars.
    No track bars but I did keep the sway bar and added quick connect/disconnects.
  • D
    dieselearl replied to the thread Trac Bars.
    my is still stock. i have rode in wranglers with one or both removed, i will stay with stock.
  • Chris
    Chris reacted to Flyer58's post in the thread Installing rear drum brakes on the YJ with Like Like.
    Working on drum brakes has always been my least favorite job to take on. Hopefully with a few simple pointers this will make your...
  • Chris
    Chris reacted to machoheadgames's post in the thread Trac Bars with Like Like.
    Plenty of people run without either track bar. In stock form I believe the front is advantageous for tighter, more responsive handling...
  • machoheadgames
    machoheadgames replied to the thread Trac Bars.
    Plenty of people run without either track bar. In stock form I believe the front is advantageous for tighter, more responsive handling...
  • D
    Daniel55! posted the thread Trac Bars in YJ General Discussion.
    Does anyone else run without a front trac bar??? I’ve removed my rear & it helped the ride but it is still rough.
  • D
    Daniel55! replied to the thread 1992 YJ Pinion Angle.
    7 to 11 degrees is what I’ve been told. I’m currently at 9degrees & have no problems. I’m running a 4inch lift & 35s with a Chevy...
  • V
    VanJeep reacted to gixxerkid3's post in the thread OEM (stock height) springs with Like Like.
    No, no lift wanted. We tow this behind our RV with the occasional trip to the woods. So a lift is really not needed. Here is a pic of...
  • G
    gbaker53 replied to the thread Dash wiring.
    Well, l have been able to get some of the wiring for the AC evaporator figured out, I have posted a picture and I will explain the...
    • image.jpg
  • J
    jeep94tj replied to the thread Does this sound like a bad ECM?.
    New cps ignition switch and coil and distributor coil new battery altnator ecm rebuilt starts up and ran now just cranks no fire
  • J
    jeep94tj replied to the thread Does this sound like a bad ECM?.
    Having same issue anyone knows what else is going on
  • G
    I am working on the 1992 YJ dash area because I had to replace the original wire harness with a different harness that was supposed to...
    • IMG_1973.jpeg
    • IMG_1974.jpeg
    • IMG_1972.jpeg
    • IMG_1978.jpeg
    • IMG_1976.jpeg
    • IMG_1977.jpeg
    • IMG_1975.jpeg
  • G
    Yes, they do, in a semi confusing manner. The factory radio has a small powered display on it and has to be illuminated. There is a...