I'm still going through the repair/replace/maintenance checklist on my '95, and got to the manual transmission oil last week. The both filler and drain plugs were difficult to remove and I had to buy a 6-point box end and a 6 point socket off Amazon. There were no washers or gaskets on either one; when I replaced the plugs, I used some copper washers from an assortment.
I now have a leak of transmission oil; it only leaks when driving, so it gets blown around on both sides of the transmission case and I'm not sure which one is leaking.
The FSM seems to call for a gasket on the drain plug but nothing for the fill plug.
Should there be a different gasket on the plug, or no gasket at all?
I now have a leak of transmission oil; it only leaks when driving, so it gets blown around on both sides of the transmission case and I'm not sure which one is leaking.
The FSM seems to call for a gasket on the drain plug but nothing for the fill plug.
Should there be a different gasket on the plug, or no gasket at all?