Latest activity Postings Images About
-
-
ytradio replied to the thread Ignition key removal when engine running.Gigidy gigidy -
ytradio replied to the thread No Oil Pressure: 1992 Jeep YJ 2.5.If you are going off of stock gauge, try using a mechanical gauge to see if the reading you are seeing is correct.
-
Since little welding jobs are piling up on this Jeep, I decided to get a beginner welder. Found a used Lincoln on Craigslist and started...
-
ytradio replied to the thread Turbocharger oil line connection.I don’t think a turbo was factory on that vehicle. You will probably have to look for info from the turbo manufacturer.
-
Here’s my ‘92 4.0 Sahara Specs: -192,000 miles 4.0 AX/15 NP231 -Sage green Low Metallic -Dana44/Ford 9”, 5.13’s Grizzly lockers - 37”...
-
I got it done. Put a jack behind the plate on the spring. That was enough to provide the support to swap it out. Ran into the usual...
-
Once I realized that nut was actually a lock nut and I should have turned it the other way before breaking the knob off, I was able to...
-
ytradio replied to the thread Front Leaf Spring Plate.Yes that will work also but the supports will probably have to be on each side of the plate so it can be removed. One support near the...
-
ytradio replied to the thread Front Leaf Spring Plate.If it’s still stock, spring is under axle so loosening the plate will cause the body and spring to go down away from axle. The tires can...
-
ytradio reacted to Chris's post in the thread 1995 YJ 4.0: Runs great but randomly dies, then won't start for a while with
Like.
Here are a few suggestions that might help pinpoint the cause: 1. Ignition Switch: Since the engine shuts off abruptly and all... -
Exactly. No need for snake oil plutonium plugs.
-
ytradio reacted to chubbs071's post in the thread 87 YJ No Power To Right Rear Brake Light At Plug with Like.
I will post a thread when the project gets closer to being completed, but here's how she sets right now!
-
ytradio replied to the thread Steering column rebuild.Check all the steering linkages. Tie rod end and ball joints. Also steering shaft u joints. The bottom steering column bearing is the...
-
You only really need lock ring pliers to do anything on the t-case. Some seal/race drivers certainly help. If you snapped the output...
-
Hi everyone, New here, but not new to JEEP LIFE. A well used JEEP Scrambler was my first “car” & have driven Jeep/Dodge/RAM ever...
-
-
Loading…
-
Loading…
-
Loading…