Need a new clutch and help identifying transmission

Tanner

New Member
Joined
Oct 22, 2025
Messages
10
Location
Rapid City
Im building a 94 yj for a daily that is also built enough for some tails, its a 4.0l with a 5 speed. I need a new clutch and transmission im pretty sure its an ax15 but im not 100% sure. Anyone able to verify what it is and what clutch kits do you recommend? Eventually ill motor swap it so im not sure if i should look for a stage 2? The transmission has an exterior slave cylinder if that helps.

IMG_7936.jpeg


IMG_7937.jpeg


IMG_7938.jpeg


IMG_7939.jpeg


IMG_7940.jpeg


IMG_7941.jpeg


IMG_7942.jpeg


IMG_7943.jpeg


IMG_7945.jpeg
 
You have an external slave AX15. I have run two clutches, Luk RepSet and Luk Pro Gold. Both are good and feel about the same. The gold is a little bit heavier on the foot but it’s super smooth.

I have run a number of flywheels. I would not recommend Luk as batches of them within the last year or so had the timing marks off and causes weird starting issues with the crankshaft position sensor. I picked up a Sach’s flywheel from AutoZone last time to solve that.
 
  • Like
Reactions: Flyer58