wiring

Hi All - total Jeep noob here trying to help my son who bought a semi-basket case 1989 2.5 manual Wrangler. We're trying to tidy up some of the wiring and noticed 2 wires that are pressed into the (manual) transmission case. The wires aren't connected to anything but their ends are exposed...

Hello everyone, we are working on my sister's YJ and here is everything going wrong... Initial issue was she kept blowing fuses for hazards and stop lights. Second issue was her instrument panel didn't light up when turning headlights on. Then the harness running up to the brake light switch...

Hey everyone, I have a 95 with the 4 cyl in it. Bought it about 4 months ago and It's been running fine. Then the starter went out. No big deal, I went and got a remanned one at O'reillys and it worked great for 3 days. Started doing the single click again so I pulled out the multimeter and it...

Hello everyone, I grabbed a set of these (Jeep Wrangler Australian/Euro Tail Light (87-95 Jeep Wrangler YJ)) in hopes of converting my US tail lights to European style ones with a separate brake light and turn signal. The pigtail plugs into the factory harness, however the brake and turn signal...

Hi y'all. I recently swapped in a 5.7L Hemi into my '95 YJ and I'm looking to get some of the basic functionality working on my dash. Essentially if someone could point me in the right direction in terms of debugging this, that would be super helpful. I believe I'm missing a ground of some...

I’ve recently replaced my clutch and when I went to start it up there was nothing. No crank no nothing. I checked the starter (which is basically brand new) and a mysterious wire appeared that I haven’t seen before. My thought is that this wire is my issue for no start. It’s two wires that come...

Hey guys/gals I need some help if your able to. From what I have found on the internet, 90-95 Wranglers never came with stock cruise control. I need help identifying my cruise servo so I can find the wiring schematic. There aren’t any numbers anywhere on the housing. Idk if the numbers on the...

Hi all, I’ve just finished putting a 95 5.2 magnum into my 93 YJ. when I turn the key to ON, the fuel pump doesn’t prime. It cranks over, but the fuel pump is not working. I used a 95 ram PCM with the factory Jeep 4.0 harness. I simply added 2 wires to Jeep harness for the 2 extra injectors...

Anyone looking for complete oem AC system for a 4.0 87-95 yj?

Long story short she won't start. I decided to try and rebuild my main fuse box under my hood with a (how-to) YouTube video and when I cut all my original wires I didn't stop to take a pic and find out what wire went where so now after I rebuild the box with new wires. I have no idea what fuse...