Latest activity
-
Hello! Making this post so I can track my work and share it as I go along. I bought a decent condition 1993 yj. I live in Michigan... -
Flyer58 replied to the thread Best way to work under Jeep?.If the wheels are staying on, I built these from 2x4's no fear of them tipping over. The wood is glued and screwed together... -
-
JoeTex replied to the thread Best way to work under Jeep?.I use four jack stands and crawling in and out from under the jeep is my exercise. -
LHello! Making this post so I can track my work and share it as I go along. I bought a decent condition 1993 yj. I live in Michigan...
-
-
It’s time to sell my ‘classic’ Jeep; we need to make room for a newer one. I have owned it for a little more than 3 years, and it’s sad... -
-
Neither of my 2.5's had any kind of restrictor in the air intake. Secondly Id shitcan that K&N for a paper filter if you do ANY off road... -
Ramps in front and the jack stands in back is what I use. I rarely use a creeper as it just slides when cranking on bolts etc.
-
JJKP replied to the thread Burning oil.Probably the oil rings.
-
Residentdeer replied to the thread Burning oil.Smokes at start up and continuously. Maybe less once warm. -
JJKP replied to the thread Burning oil.It's probably the valve seals if it smokes mostly at hot idle, but not driving down the rd. Mine doesn't smoke at all on the rd, but if...
-
Residentdeer replied to the thread Burning oil.I have no oil on my plugs.
-
JJKP replied to the thread Burning oil.Possibly. If you don't have just one oily plug, hard to know.
-
JJKP replied to the thread Burning oil.No, the valves are closed on compression. The valve stem seals are just rubber and prevent oil from leaking down the stems. My 92...
-
-
Residentdeer replied to the thread Burning oil.Wouldn’t that be evident on the compression test? I assumed this was the issue given the PO prolly didn’t have the head done when the...
-
Residentdeer replied to the thread Burning oil.So my oil control ring is toast on a cylinder?
