More of a rant than anything. I'll be installing a new exhaust system and shocks and the way the tailpipe crosses over the sway bar it looks like my only option is to remove the bar and quickly get the exhaust in place. I don't have any lift kit so the space is pretty tight and I simply cut up the old rusty pipe to remove it.
Well the shocks came off with no problem as did the right side sway bar bolt but the left side bolt is stuck in the bushing and will not budge. It rotates fairly easily yet does not slide out even when turning and pounding at the same time.
I have it soaking to see if that helps. It won't be the first time I've had to cut through a suspension bolt to get it out.
Meanwhile spider webs are building up on the inside of my rims while I wait.
Well the shocks came off with no problem as did the right side sway bar bolt but the left side bolt is stuck in the bushing and will not budge. It rotates fairly easily yet does not slide out even when turning and pounding at the same time.
I have it soaking to see if that helps. It won't be the first time I've had to cut through a suspension bolt to get it out.
Meanwhile spider webs are building up on the inside of my rims while I wait.