Good morning!
First post here, need some help.
I have a 1992 ish straight six in my '81 CJ that was converted about ten years ago with a donor motor and harness.
I've been chasing down a no start/no spark problem. Finally narrowed it down after a couple of attempts to a bad CAS, and replaced it. I also replaced the distributor as it was showing signs of age and the bushings were worn out and the distributor shaft was pretty loose.
Question: Can I run the newer distributor with the round cam angle sensor on top on this jeep, the original jeep had the funky older style cam sensor that was underneath. It looks like the timing/pickup would be the same, just checking. It looks like it should work...
First post here, need some help.
I have a 1992 ish straight six in my '81 CJ that was converted about ten years ago with a donor motor and harness.
I've been chasing down a no start/no spark problem. Finally narrowed it down after a couple of attempts to a bad CAS, and replaced it. I also replaced the distributor as it was showing signs of age and the bushings were worn out and the distributor shaft was pretty loose.
Question: Can I run the newer distributor with the round cam angle sensor on top on this jeep, the original jeep had the funky older style cam sensor that was underneath. It looks like the timing/pickup would be the same, just checking. It looks like it should work...