Search results

Is your 2.5 Auto or manual? You will need a spacer put on the head of the CPS if your transmission is an auto. I've heard people layering stickers, but I am not sure how thick. We are talking millimeters. Napa sells them, but it is $10 for one. If you have a manual transmission, then no worries...

Hello, I am slowly finishing up my transmission swap and I need bolts sizes for the Crankshaft Pos Sensor and bolts sizes for Slave to bell housing. Thanks. Edit: Never mind I found both sets on Ebay.

This is for the Neutral Safety Switch?

Yes, the one near the firewall on the driver side of the motor is the unit that goes to the gauge. It is a bit difficult to get out. I used a short, I believe 14mm or 15mm wrench to remove it. You may be able to use a deep socket, but be careful and inspect the inside of the socket. I have...

Ace Ventura When Nature Calls. There was a Safari custom YJ and CJ during the infamous rhino birthing scene.

I think they are about the same. There is a good 95 FSM on the resources section of this forum.

CPS, is that the crankshaft position sensor or camshaft position sensor you changed? Those should throw off engine codes though. Do you have any codes? The only other thing I can think of is a bad spark plug.

Someone put PT Cruiser seats in their YJ:

*2006 GMC Sierra 1500 Automatic 4.8l Crew Cab 78,000 miles *Engine light code p0446 Evaporative emission control system vent control circuit malfunction. I am having an issue trying to resolve the code for emissions so that I can get an inspection sticker. I have changed out the evap sensor...

Interior door panel trim for half doors? Mine have speaker holes cut into them.

What Macho said^^

Damn, that was a recent change. I bought mine in May of this year at the $1650 price before shipping and tax.

Here is the seller who make's the full door panels: https://www.ebay.com/str/wilksplus

I usually see the bezels for good prices on facebook marketplace. I think they are about $20 a piece at deadjeep or on ebay. You can also buy them from Crown, but I don't think the colors match that well with the original interior colors. The vinyl dash if found in mint condition is going to be...

I completely missed he is getting the motor too.

You will need a shifting steering wheel column, unless there is a mod out there I am unaware about. That and a radiator with transmission cooling for the cooling lines. The only other thing I can think of is you will have to remove the pilot bearing and the holder for it that sits in the back of...

You did a hell of a job. I would definetly like to see a write up with photos with all you did to it. I can't say whether you should sell it or not. I am still at the beginning stages with mine, but I do have a Blue Islander in mind when I eventually paint it.

I would look into the Crankshaft Position Sensor or Camshaft Position Sensor, but normally those will throw codes.

I am not sure what size they are, but you can probably find an original used set on ebay. What do you mean by, "can't get them out". Are they not breaking or stripped?