Search results

Plus my stock transmission skid has some definite rust compromise, so a mild tummy tuck with a new skid plate could be nice. I suppose I could tolerate a small body lift if I had to.

With the OME springs it has in the rear I had driveshaft vibrations, so it has a T-case drop at the moment. I’d have to get a double cardan rear driveshaft and SYE, I suppose.

I've had an LJ for the past 5 years and built it for moderate Colorado mountain trails. It's on 33's with 2.5" OME springs 1.25" body lift, and JKS Quicker Disconnect sway bar links. It is otherwise basically stock, with all original control arms, no tummy tuck, stock driveshafts, gearing and...

I found grade 8 1/2” flat washers in a 3-pack at Lowes; two washers fit the bill. Now the tailgate is solid and quiet; definitely recommend new seals if the existing one is old.

I would say it’s Matte; not true flat but close

I’ve replaced the rubber seal on the tailgate and I’m finding that the striker needs to move rightward in order to line up with the latch. I installed a new striker a few months ago and it came with one washer, but the parts catalog shows three (all discontinued of course). Can I just use any...

Yes space to park cars is part of the problem. We have a big family and our teens and young adult kids have cars too. I read the JeepAir instructions and it isn’t too daunting. I need to completely remove the heating/vent system anyway to clean and replace cables. Can you comment on whether...

Yes I do have two toys now, which I never thought would happen. The new car is an ‘05 lotus elise. It’s probably similar to a viper in practicality. I do plan on commuting with it 1-2 days a week, but there are some parts of town I visit for work I wouldn’t take it, and it won’t be good in rain...

I’m torn which direction to go. I like the jeep as it is, but it’s not great as a daily driver. Since I got a sports car in January my wife wants me to get rid of either my old civic or the YJ. It’s like having to choose between losing an arm or a leg!

Thanks for the insight; I’ll look into the nostalgic version. I’m beginning the second summer of running the YJ with a bikini top and no doors, but the road noise and heat are getting unpleasant for commuting. Plus I can’t always park in the garage, so it can get rained on by a surprise shower...

I'm thinking about making the YJ more of a daily driver, but if I do, I'll have to get A/C and probably a proper top instead of just the bikini. The JeepAir kit looks quite good and the install looks manageable; can anyone comment on their overall satisfaction? it seems that since it is a...

Thanks for the advice; I looked into it last night. The problem ended up being the latch release rods, not the locking rods. I had never connected the inner lock rod, and the outer lock rod has a lot of play and is not threaded-adjustable anyway. I ended up unclipping the rods from both the...

Lefty loosey… Seriously , you need a T50 socket and one of these: I’d trace around the existing striker so you can locate the new one in the same place. Use some penetrating oil/spray in advance. Good luck

Mine were similar; I decided to just replace them rather than painting such irregular surfaces and sourcing odd springs.

I did mine a month or so ago along with new interior and exterior door handles, and for some reason the lock mechanism now catches when I lock them with the key so I can’t unlock them without prying on the lock from the inside with a flat screwdriver. I can imagine I messed something up on one...

I might have to try that method in reverse; there’s a bit of Spice overspray onto the black that would be nice to clean up someday.

Does the SEM Camel match the existing Spice parts in the dash as well as the photos appear? Or did you just spray everything?

I used a mild polishing compound on the red lens, and it seems fairly bright with both bulbs in place. Not a dramatic mod, but it makes me feel better in traffic, and it’s legal.

I removed about 0.4mm of diameter to fit into the female wire connector with the little sanding drum, and used a cutting wheel to make the narrow part near the end. These posts are aluminum so I won’t have rust in the future. I traced and cut a gasket out of some spare gasket material to...