Hey Jeep peeps, I'm new to this as this is my first post. I have been restoring my 92 yj and I'm at point of trying to start engine. I can't get this thing to start and have exhausted my knowledge. I have checked fuel pressure, new injectors, pressure regulator, all new sensors, new everything!! Engine will crank but not start. Checked timing, new plugs, wires, distributor. I'm lost as what to do? Please any suggestions would be greatly appreciated
1992 Jeep YJ 4.0 will not start
- Thread starter gwood804
- Start date
redbullet
YJ Enthusiast
redbullet
YJ Enthusiast
Flyer58
YJ Enthusiast
Checked grounds and seems to be good. What all grounds should be checked just to be sure I have checked all
with all new parts, some may be bad. do you have fire at plugs, will it start if you put fuel down the throttle body. what does your codes say. cel off or on?
I have fire at plugs. I tried spraying a small amount of ether in throttle body with no luck. Cel is not on
some time back, i read on this forum something about the overhead dome light having some effect on starting, but dont remember just what and i cant locate the article.
If you have spark and it won't run on starting fluid, almost certain the distributor is 180 out.