Search results

Does anyone have these doors? If so, how was the fit and what should I look out for?

changed the dash piece out that holds the lights, cleaned plugs and dielectric grease before reinstalling. Nothing lights up. This jeep has a 5.0L v8 swap so I don't know what all they did.

yes, I was talking about the high beam indicator. I already checked the turn signal switch plug. I was hoping it would have another plug somewhere. I don't want to pull the dash apart again. May just leave it as is.

no stock bulbs. I just bought another panel and replaced the old one because I thought it was bad.

we changed the dash for the idiot lights and still does not show turn signal indicators or headlights on dash. This is on a 1990 jeep with a 302 ford v8. where does the dash get its power to these indicators? The pugs are plugged in good and clean. We just put a like new dash piece in it. Would...

You can se the 2 places the plugs go to, and I don't see how they unplug as there is no clips. But I pulled on the plugs in the jeep and they would not come unplugged. This is not the dash, just a picture to show where the plugs go.

yea this one sit out in a field for years. Way passed that.

how do you get plugs unplugged from the back of the panel? I don't see any clips and it will not come loose. I am replacing the panel because none of the lights work.

Just installed mine this weekend. I left the inner boot in there and install over it. Made my shifter shift so much easier than the rubber boot. Took me about 2 weeks to get it but it looks nice.

okay I ordered the parts, new bushing and lift spacers. I will have to get new longer bolts. 75 bucks for 2....I am going to cut a 2 inch hole with a hole saw in the wheel well and put the nut and washer inside. I will then pop in a 2 inch plug and call it the day.

to get to the bolts I will have cut the bed. I see no other way to get to it. I would also need the factory rubber for bother sides and the metal sleeve as well as 2 longer bolts and a 1.25 spacer for each side. Anyone sell these together?

I noticed I have a 1.25 inch body lift on my Jeep that was there before I got it. It has a 4 inch lift also and 35's with a 2.5L. Yes, it is slow as a Toyota truck. But my question is the rear 2 body mounts near the bumper at the corners are missing. After checking the bolts are broken off. The...

I have a 2.5l with a 8.8 rear with 4:10 gears. It is the slowest truck I have ever driven. Feels like a Toyota 4x4 pickup. My son has a 1990 YJ with a 5.0 ford v8 with a c6 and a np205 transfer case. It runs like a raped ape. I suggest not worrying about power. It is not happening.

make sure the speed sensor is not wired backwards if it has been replaced. If not disregard.

replaced the dash cluster and now it works....so happy!!!

now I see the picture you posted. took a while to show up. Yep that's the plate I need.

if anyone has an old broken box that they don't need I would like to get the plate off it. If not I will make one but rather have the factory look.

yea I can make one but wish I could find a stock piece.

turn the box up right and the plate is on the bottom right side

if you find them I will pay you for all the shipping. Just let me know.