I have a new to me, 1989 Jeep YJ Base. In the spring I removed the Rampage Soft Top. I had replaced both bad door panels, along with the 3 post inserts in the door for installing the passenger and drivers door windows.
When putting up the top for winter, I went to put the passenger side window on, I could not get the first post (towards front of the Jeep) to seat fully down. It is about 1” high and I cannot get it any further.
Does anybody know why it will not go fully in (I used a heavy hammer to try and get it fully seated with no luck).
If nobody knows why it will not fully seat, as a workaround, would cutting off the excessive post down about an inch cause any other issues or is that an acceptable solution to this problem?
TIA, Rod
When putting up the top for winter, I went to put the passenger side window on, I could not get the first post (towards front of the Jeep) to seat fully down. It is about 1” high and I cannot get it any further.
Does anybody know why it will not go fully in (I used a heavy hammer to try and get it fully seated with no luck).
If nobody knows why it will not fully seat, as a workaround, would cutting off the excessive post down about an inch cause any other issues or is that an acceptable solution to this problem?
TIA, Rod