I recently bought a used 93 YJ. I have discovered that I have no tail lights/dash lights/horn/radio. I’ve checked all my fuses, both under the hood in fuse block & under the dash. I discovered also that (so it appears) I do not have power to fuse/socket #10 under the dash. All fuses are otherwise working as they should. I have looked in manuals and been either unable to find the issue - or didn’t really get the wiring diagram. Suggestions??
No tail lights
- Thread starter FG5619
- Start date
The tail light circuit feeds to the headlight switch from Fuse 8 (20A) via a Pink/Red 18 ga wire. It exits the headlight switch via a Black/Yellow 18 ga wire. That wire dives into the loom and up around the steering column hits a big splice and goes a bunch of different directions. From what you're describing that whole circuit is dead.
So... Check for current at the Pink/Red wire feeding the headlight switch. Then turn the lights on and check for current at the Black/Yellow wire exiting the headlight switch. If things aren't as they should be, follow the trail either into the loom or back to the fuse panel.
So... Check for current at the Pink/Red wire feeding the headlight switch. Then turn the lights on and check for current at the Black/Yellow wire exiting the headlight switch. If things aren't as they should be, follow the trail either into the loom or back to the fuse panel.
HankTheTank45
New Member
Having a similar issue with my '95 Rio Grande Wrangler, turn signals only work with brakes pressed. Any ideas on whats going on here?