Hi everyone, I have a question I can’t figure out, I have a 93 wrangler with a 3” body lift, can anybody tell me how to install the inner shifting boot. I know how to install it but when I do the transmission won’t stay in 2, 4 and reverse. I think it’s because of the 3” body lift, would anyone know what to do
How do I install the inner shift boot?
- Thread starter Davey
- Start date
Good luck with a 3" body lift. That thick boot being that high up the shift tower will wreak havock on the shift forks if nothing else. Try sourcing a nice soft leather on from a junk yard or maybe aftermarket. Do make sure the trans tower where the shifter sits has a good boot.
Ditch the body lift and @machoheadgames just went through this on his build so check it out
I suggested removing the body lift on another thread he had posted in. He made a separate thread.
@Chris probably took his post and made it a thread because the post wasn’t on a thread where it should have been.
White J
Member
yea I have a transfer case drop and my boot try's to make my trans come out of gear. When it cold I have to hold it until the boot heats up. Wish someone made a soft rubber boot.
Ozark mike
New Member
I notched the floor pan on my 94 and moved the boot back and screwed it down. Works good. But I only have a 2 inch.