Search results

I solved the problem. The key was to completely remove the upper steering column mount bracket. This allowed me to pop the black wire protector off its mounts and slide it down towards the bottom of the steering column allowing the wire protector to top open like a clam. It was then very easy...

OK Problem solved. After studying an exploded diagram of my 95 YJ with a tilt column and intermittent wipers, I realized that completely removing the upper steering column support bracket would allow me to lift the cable guard off its mounting bosses on the steering column. I slid the guard...

Thanks Redbullet, I was following Power Addicts' video. I did everything he mentioned except for the 1/4 rod to help open things up. Did you use the rod? If so how long of a rod is necessary? I do have intermittent wipers and it looks like that harness is in the way of where he inserted the...

Hi All I am in the process of installing a new multifunction switch into my 95 YJ tilt steering column. After cutting out the old switch, I attached a "pull" wire to the new switch's plug and feeding the plug of the new harness into the top of the column, I managed to get the plug stuck half...

Im in the process of replacing the turn signal switch on my 95 with a tilt steering column. I cut out the old switch leaving a wire to use as a snake. I attached the snake wire to the new turn signal switch plug and fed it down the top of the steering column. I managed to get the plug about half...

Ridgefield WA 95,91 Yjs.

Woo Hoo 🥳 Multi-function plug and socket are separated. The 4 key steps to success 1) make sure to know how the plug locks into the socket. In this case its a simple tab lock on the socket side securing the plug. 2) was heating up the under dash area with an electric heater to warm the connector...

Thanks for your feedback Macho. I'm old so its hard for me to see this plug and socket correctly. Is the tab part of the female socket or part of the male plug. Assuming I have the correct replacement part, the tab looks like part of the female socket. If the Tab is part of the socket, does...

Hi All Any tips on how to separate this 95JY multifunction switch plug from this socket which is located under the steering column. Its the first time Im doing this and Im not sure how this comes apart and I don't want to force anything . Its very cold outside so the plastic seems brittle. Does...