Search results

The cold air intakes and other throttle body mods are usually a waste of time and money. The 2.5/4.0 just doesnt seem to respond to these types of mods unless you are modifying the crank and the heads.

I still have a few more mounts to cut out to include the factory track bar frame mounts, both frame shock mounts for the front end, and the sway bar frame mounts.

Spent some time today cutting out the old 2.5L engine mounts.

Looking great. Soa front and rear. What tire size are you running?

Wish I had gotten to you before ebay did. Rancho RS5000X shocks have a cult like following over on the TJ forum. They are likely awesome shocks for our YJ’s.

Lets see some pics of your Jeep. Have you checked fuses for your instrument cluster issue? Omix-Ada/Crown Automotive likely sells a window regulator, I would take the door panel off and do a visual inspection to verify the regulator is the issue.

Try Rancho RS5000X Shocks.

Looks much better. FYI, Rancho RS5000X shocks are some of the nicest off the shelf shocks for our Wranglers.

If you get a later model 4.0 make sure you get the computer and as much parts as possible from the donor.

I believe it takes a little bit of bending, Bestop does sell rounded upper corner upper doors.

Take you time and be patient. Do you have a lift of some sort, or a few folks to help with lifting and setting the tub?

A Wrangler on 31’s makes for a reasonable road Jeep that looks aggressive and can tackle light trails/dirt roads which are fun.

It’s hard not to offend someone. But id say its worth 2-3k

Call Quadratec, I am not sure you can buy those specific parts. But Quadratec will be able to tell you for certain. https://www.quadratec.com/jeep-replacement-parts/wrangler-yj/yj-soft-top.php#nm3

You could likely make some money back by parting it out. Good luck. I highly doubt he will get 4k for that YJ. Ask for some frame pics. Especially around the skid plate mount, and the leaf spring frame mounts.

About a year ago I purchased a used YJ Genright stretch tank. However, it came with the steel skid. It's strong but heavy with the skid being steel. A few weeks ago as I was heading back to the United Stated from the Middle East, I saw that Genright was parting out their YJ, "Growler," build...

The MaximumTranmission built 4L80E has been uncrated and is ready for mock up. https://maximumtransmissions.com/index.php/product/4l80-standard-case-builds-ultra4-prerunner-crawlers/

The Earls US made -8 AN fitting was delivered Sunday. I took some interesting comparison photos. The Chinese made -8 AN fitting doesn't seem to have the same amount of thread engagement when compared to the US made fitting. The Chinese fitting has a shoulder inside the fitting that makes the...

Absolutely love the color combo. My older brother had one in this color. Excited to see what you do to her.

You could try Daveys Jeep or Collins Bros.