Search results

How's it holding up?

I like that mine have alemite fittings on the upper lower pins/bolts.......No squeaks.........

Did a 1995 2.5 to a 1994 4.0 swap......NOTHING interchanged.......................

These Guys are fantastic.....Used them myself............................ https://www.ebay.com/itm/324129811652?mkcid=1&mkrid=711-53200-19255-0&siteid=0&customid=link&campid=5337789113&toolid=20001&mkevt=1

Check your fuel line routing?

OK.....Replaced both seals this past weekend and found out that I could only use the new aluminum outer dust shield "Plug" on the drivers side because of the larger diameter axle on the passenger side. I have no problem going back in and eliminating the CAD and one piece the starboard axle...

Hey......We got it figured out.....

Have the Dana 30 front axle apart fixing the inner oil seal leaking on the drivers side. Got that one set with the seals inner spring facing inward toward the carrier. Went to set the passenger side in the the axle tube right of the access panel for the FWD fork with the inner spring facing the...

Did you ever find one?

Want to install a four point seat and harness in my '95 YJ...Question I have, Are there hard points already set to bolt the harness to the bucket? Or do you have to install a bracket of some kind? Any and all help is GREATLY appreciated!!

Is that what that is?:D

Mine are in the attic.....:ROFLMAO:

I just finished swapping out a 2.5 to a 4.0, And it was a real challenge getting that squared away but was waaaay worth it..... Then had to correct the rest of the drivetrain ie. tranny, Transfer with a SYE kit and swapping both gears from 4:11 to 3:07's because I drive it on the highway way...

Just went through this.....Installed a SYE kit from Adams Drive Shaft this week and went with both refurbed trans and transfer case....I can't believe the difference in the ride and the elimination of both vibrations and noise....I have both a 2.5" suspension lift and 1"body lift with 31's on a...

I run 31's with 3:07 gears with a 4.0 HO, AX-15 5-speed....I cruise the interstates 70-75mph no problem 2000-2100 rpm's...........

First thing I'd check.........

Sounds sweet and light years better than the one I found and did a total drive train redo and use for a daily driver......... I'd get it and never look back.................

Check out #10.......Dome light fuse that also powers everything essential for internal combustion.....Both spark and fuel..........

Change the dome light fuse......Don't ask me how I know this......After spending HUNDREDS on the usual suspects........... Yeah did that, No Bueno..................Dome light fuse.....................