Novak Conversions Jeep Wrangler YJ shifters

Help a Dad with a front bumper replacement question for his 15 year old son's '91?

S

Swordsman

New Member
Joined
Sep 19, 2024
Messages
6
Location
Omaha, NE
Is this ready for a replacement? Meaning, is that what it should look like and all I need to do is find a bumper that is supposed to fit a '91 YJ and I'm good to go?

Or is what's there not "standard" and I need to do further investigation?

Thank you

440137417_10221438962642089_1393671654233865215_n.jpg
 
Also, ordered a Chilton's, it should be delivered tomorrow, but thought I'd get a jump on this if you guys don't mind throwing some knowledge my way.
 
the last time i checked, U_PULL IT, at 1405 grace st in ohama, telephone 402-342-0831 , had what you are looking for.good luck
 
dieselearl said:
the last time i checked, U_PULL IT, at 1405 grace st in ohama, telephone 402-342-0831 , had what you are looking for.good luck
Click to expand...

I'm not sure what that means...I'm looking to buy an aftermarket bumper, probably winch ready, but I have no idea if what is on there right now is ready to "receive" it.

Is this YJ just lacking a front bumper or is there something aftermarket on there currently that will make just buying one and installing it difficult?
 
It looks like the bumper mount nuts are still inside the frame rails.

Cancel the Chilton's order and get the FSM from Resources here. The factory parts books are there also.
 
JKP said:
It looks like the bumper mount nuts are still inside the frame rails.

Cancel the Chilton's order and get the FSM from Reso
Click to expand...

JKP said:
It looks like the bumper mount nuts are still inside the frame rails.

Cancel the Chilton's order and get the FSM from Resources here. The factory parts books are there also.
Click to expand...

I'm assuming that the mount nuts being still inside means I'm good to go. I failed to find "Resources" on this site...did check out the Amazon store, was surprised to see it was a TJ store?

BY saying find it "here" was here supposed to be a link? I did find the FSM on this site:

https://www.bishauto.com/literature/1991-jeep-body-chassis-electrical-repair-shop-manual

I'm hesitant to shell out the cash because it just says Jeep, not any model info.
 
It looks pretty bad ass, in a good way. I bet they had an aftermarket front bumper on there and it got mangled. You can easily get a used stock front bumper and bolt it on. Try deadjeep.com or eBay.
 
Swordsman said:
Is this ready for a replacement? Meaning, is that what it should look like and all I need to do is find a bumper that is supposed to fit a '91 YJ and I'm good to go?

Or is what's there not "standard" and I need to do further investigation?

Thank you

View attachment 123344
Click to expand...

There is no bumper on there now, the round bar is part of the stock frame. Any bumper for a YJ factory or aftermarket should go on just fine. By the way, the front fenders rear fender flares and rock sliders are all Metalcloak. Good stuff, it’s what I plan on getting. Also a winch can be added without a bumper, if your local law allows.
 
Novak Conversions Jeep Wrangler YJ shifters
Top Bottom