machoheadgames's latest activity
-
machoheadgames replied to the thread Rebuilt 4.0 engine doesn't make enough vacuum.There might be some confusion between master and booster here. The booster is what receives a vacuum supply and boosts the fluid... -
-
machoheadgames replied to the thread Rebuilt 4.0 engine doesn't make enough vacuum.Is 18-22 in a factory spec for the engine vacuum? I'm not seeing that in the FSM but maybe I'm missing it. I would think if the spec is...
-
machoheadgames replied to the thread Extremely high idle.That’s the problem. You likely didn’t reseat the intake manifold on the dowels properly. That will immediately cause a huge vacuum leak.
-
machoheadgames replied to the thread Extremely high idle.I understand that but sometimes new ones don’t idle correctly either. If you plug the hole and it dies, then you know immediately. If...
-
machoheadgames replied to the thread Extremely high idle.IAC could be stuck open allowing too much air to pass at idle. Block off the IAC air port in the throttle body. It’s a little slot in...
-
machoheadgames replied to the thread 1992 YJ Pinion Angle.I totally missed that you said shackles. I thought you did a 2.5" spring lift. In that case, yeah the shackles definitely rotate the...
-
machoheadgames replied to the thread 1992 YJ Pinion Angle.There has to be shims installed if your pinion angle changed when you installed the springs. Stock pinion angle is around 9-10 degrees...
