You would need to find the output wire from the brake switch that runs to the turn signal switch and cut it, and seal off the turn signal switch end. Then the leftover cut end from the brake switch would need to be extended out to both tail lamps as a brake wire.
The old stop/turn wires will become turn only and go to the amber portion, the new extended wire will go to the brake portion and the old tail lamp wire will go to the dimmer parking/running lamp side of the brake bulb.
Keep in mind the euro lights have no license plate light so you might want to get an aftermarket light. they also do not emit very bright light with incandescent bulbs, so now would be the time to go LED in them if you want them. I tried them on my Jeep but couldn’t commit, I went with super bright quadratec LEDs instead. I wish they made a version with an amber turn strip but oh well.
Sharp looking Jeep.
