Forums
New posts
Search forums
Image search
Shop
Amazon Store
T-Shirts
Stickers
Members
Current visitors
Supporting Member Upgrade
Sponsors
About
Log in
Register
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Image search
Search
Search titles only
By:
Search titles only
By:
Menu
Install the app
Install
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
Jeep Wrangler YJ
YJ General Discussion
Speedometer Calibration?
Reply to thread
Message
<blockquote data-quote="Walt Jaquith" data-source="post: 426550" data-attributes="member: 18654"><p>Mine's not stock anymore so my specifics won't help you, but you'll want to mount the DD unit close to the fuse panel under the dash. I put mine on a plate with 3M double-sided foam tape, but it has regular mounting lugs as well.</p><p></p><p>You're looking for a white wire with an orange stripe coming through the firewall behind the fuse panel, and heading to the instrument cluster. That's the speed sensor feed to the speedometer. I found it at both ends, cut it fairly close to the instrument cluster connector, and pulled it out of the loom, using it to fish another wire in. That left me plenty of wire to get to the SGI-100BT, and I only had to make the one splice of the new wire up by the cluster connector.</p><p></p><p>[ATTACH=full]116167[/ATTACH]</p><p></p><p>Also , the buzzer module is mounted to the bottom of the fuse panel. The dark blue/white wire that connects there is a power feed from the ignition switch, and the black wire is a chassis ground. Good place to tap for both of those.</p><p></p><p>[ATTACH=full]116168[/ATTACH]</p></blockquote><p></p>
[QUOTE="Walt Jaquith, post: 426550, member: 18654"] Mine's not stock anymore so my specifics won't help you, but you'll want to mount the DD unit close to the fuse panel under the dash. I put mine on a plate with 3M double-sided foam tape, but it has regular mounting lugs as well. You're looking for a white wire with an orange stripe coming through the firewall behind the fuse panel, and heading to the instrument cluster. That's the speed sensor feed to the speedometer. I found it at both ends, cut it fairly close to the instrument cluster connector, and pulled it out of the loom, using it to fish another wire in. That left me plenty of wire to get to the SGI-100BT, and I only had to make the one splice of the new wire up by the cluster connector. [ATTACH type="full"]116167[/ATTACH] Also , the buzzer module is mounted to the bottom of the fuse panel. The dark blue/white wire that connects there is a power feed from the ignition switch, and the black wire is a chassis ground. Good place to tap for both of those. [ATTACH type="full"]116168[/ATTACH] [/QUOTE]
Verification
Post reply
Forums
Jeep Wrangler YJ
YJ General Discussion
Speedometer Calibration?
Top
Bottom