Hey y'all hope everyone is having a great day. I'm having a problem with my jeep. I replaced lots of sensors as part of a tune up and got a new battery and pcm from wranglerfix. When I go to turn the key to the on position, all the lights light up and I get all my dash lights ect. The problem is when I try to crank it. I get an immediate "click" and loss of all power. Take the key out and turn key back to on position and there's no power anywhere. It's only when I disconnect and reconnect the battery that I am able to get power back when I turn key to on position, but further cranking it results in the "click" and loss of all power and the cycle repeats. Any help and ideas would be much appreciated. Thank you!
“Click” then loss of power
- Thread starter Sjh945
- Start date
Id start with bad battery connections or cables. Cables can look OK but internally their shot and full of corrosion.
redbullet
YJ Enthusiast
Ohhhhhhhhh yeahhhhhh can you dig it?
www.jeepcables.com
Jeep Wrangler YJ Big 7 Battery Cable Kit (1986-1995)
This upgraded battery cable kit replaces old worn out battery cables for more power and better performance from your vehicle. What is the "Big 7" Battery Cable Kit Our "Big 7" kits include the standard "Big 3" cables: alternator output to battery positive, battery negative to frame/body and...
www.jeepcables.com
have you tried to start it with jumper cables,or it possible that you have a bad starter or starter solinod.