Recent content by Sunrnr33

Sent you a PM

I'm replacing the shackles and bushings on the YJ and wanted to pass along this info that I ran into. I have Skyjacker Soft ride springs which I identified after I bought the Jeep, glad they have a label on the spring eyes with a P/N. Most shackle kits that come with bushings are the stock...

For the final wrap up of this topic I took it for a road test and the speedo works great. I installed a 35 tooth gear for the 33's I'm going to have and the speedo cable was 82" long. Next will be the matching Autometer tach, Thanks again to machoheadgames for the gear housing!

A general rule rule of thumb for any nut on a bolt is two threads exposed past the end of the nut, that's the mechanical standard.

Teflon tape and good to go...

To conclude this topic the Mopar part# 2538608 is a good number and you can find an OEM part and also Advance Adapters also makes the part #301506. The cable uses 5/8 and 7/8 fittings on each end. Hope this helps the next person find the info.

Looks good, you'll figure the mechanicals out, this is a good source for the help you may need. Fluid film is the way to do the underside, stuff is great, been using it for decades on military aircraft corrosion prevention.

Thanks for that info, I'd be happy to pay shipping and for the part. I've read some of your posts and the info is always good. I've been bending wrench's for a long time and always look for the tech or parts I need, but this is one of those items you just can't find. The speedo and cable are...

I'm a new YJ owner, picked up a 95 that has had extensive swap work done, 350, new AX15, Novak T-case kit, etc. When the work was being done some of the wiring was removed and one of those things was the speedometer wiring and I'm going to put a mechanical speedo set-up which was in the YJ's...