Recent content by Sam Tallent

I put a new radio in 95 yj new antenna, new coaxial, new wiring. But when I move the jeep it goes in and out. It works fine with bluetooth and cd radio stations are the only issues plz help.

Brakes are new also. I can in 1st after that it goes to acting up. No issue with neutral.

I have not changed that . With all I have changed I guess I can change it too lol.

When I changed fuel pump I put new lines all the way back to front. As listed from first post I did all the sensors plugs wires cap rotor button. Also when I had the fuel pump out I drained all gas got rid of it and cleaned the tank out. I know your trying thanks .

It doesn't change plus it is new I have a header straight pipe to a magna flow.

Yes that is battery disconnect

I run smoke thru the engine no leaks. I changed both ccv elbows on valve cover. I also check all the sensors connector before I changed them all good. I ordered a camshaft position sensor that goes in the distributor hope this solve the issue.

No codes are present, my fuel pressure is 42 and doesn't leak out. I can start out in 1st and as I go to 2nd it starts to jump and losses power with more load.

Have a 95 yj 4.0 having issues with power ,it will idle good sometimes rpm will go up and down but when you put a load on it it falls on it's face. I have changed 6 injectors 4 hole, throttle position sensor, throttle idle sensor, air intake temp sensor, coolant temp sensor, map sensor, 02...