Recent content by Sahara90

I’ve been working on my 90 4.2l and have had issues. Here’s what I found. First let me say that you should check your compression to determine if you engine is tired. I nuttered mine an rebuilt my carter carb. Although the engine ran better something just wasn’t right. Here’s what I found...

Try the 1.5 turns out on the mixture screw. The idle screw is two turns in after the idle screw contacts the stop. These settings will only work if you fix the vacuum leak.

Cameron You may have a vacuum leak at the brake booster. You can remove the hose to the brake booster and plug It temporary. If you drive with the hose disconnected you will have little or no brakes. You said the engine will run with the idle speed screw turned in all the way. With the idle...

Has anyone purchased a crown bbd42s non stepper motor carburetor to replace a bbd carb with the stepper motor? Are the crown carbs any good? EBay has new Chinese BBD carbs For under $100. Are these Chinese clones the same quality as the crown model? Please don’t suggest a Webber or...

I found a replacement part on eBay. I think it was about $150. You have to search for it on e bay or a Jeep scrap yard.