Plastic Fury's latest activity
-
Plastic Fury replied to the thread 1995 Sahara project.The door mirrors and wipers were in pretty rough shape as well. Spent some time cleaning them up and removing the corrosion that had... -
-
Plastic Fury replied to the thread 1995 Sahara project.The interior needed some freshening up as the door panels were bleached quite a bit from the sun. The new rebuilt manual tilt column was...
-
-
Plastic Fury replied to the thread SYE Install Question.Yes, the metal rails are a transfer case drop kit, the pucks are the same thing. Probably came with the lift kit when it was installed...
-
Plastic Fury replied to the thread 1995 Sahara project.Thankfully the wiring on this Jeep had been basically untouched save for the radio harness. Pretty common of course. My previous YJ had...
-
-
Plastic Fury replied to the thread 1995 Sahara project.Given the condition of the "coolant" that was in this engine and how much sludge and rust I found in the block, I knew the whole coolant...
-
-
Plastic Fury replied to the thread 1995 Sahara project.The engine harness is the same for both the automatic and manual YJ's except for a small jumper that is just above the transmission...
-
-
Plastic Fury replied to the thread 1995 Sahara project.Once the engine was back in, I got back to some more "while you are in there" and replaced the timing, the chain was a little slack but...
-
-
Plastic Fury replied to the thread 1995 Sahara project.Back to it.............. I still wanted to replace the core plugs at the back of the block, especially after seeing how rusted the 5...
-
-
Plastic Fury replied to the thread 1995 Sahara project.Yeah, I have actually had the Jeep on the road for the past 9 days now. Put a plate on it and took it for it's shakedown run on the...
-
Plastic Fury replied to the thread 1995 Sahara project.I appreciate it. Your info on the manual swap was very helpful and made wiring up the pigtail a breeze. Not to mention other info you...
-
Plastic Fury replied to the thread 1995 Sahara project.Yeah man, thanks. Always wanted a Sahara and was stoked to finally get one. I actually ordered the graphics from Phoenix a few days...
-
Plastic Fury replied to the thread 1995 Sahara project.With all of the engine accessories removed, I started to remove the drivetrain. I had already gathered all the parts to do the AX15...
-
-
Plastic Fury replied to the thread 1995 Sahara project.The Jeep only has 61k on it and the engine was running and sounded pretty good but was leaking oil all over. I started to go through the...
-
-
Plastic Fury replied to the thread 1995 Sahara project.Thanks, it's coming along for sure. I always love the Sahara trims. That would be awesome being the original owner of a 1995, you know...
-
Plastic Fury replied to the thread 1995 Sahara project.First thing I wanted to tackle was getting the axles swapped between the Jeeps. I knew the rear diff spider gears had been welded on the...
-
