deadpool1's latest activity
-
deadpool1 replied to the thread Steering Vibration.That stabilizer is shock damper device. it's purpose is but 1. (mostly) but here it is: if say a tire hits rock or a RUT offroad, the... -
deadpool1 replied to the thread 1987 YJ 4.2L EFI conversion with in tank pump suggestions?.or read this $1600 cure is a pain to start in the morning
-
deadpool1 replied to the thread 1987 YJ 4.2L EFI conversion with in tank pump suggestions?.topic 1, the horror of oem BBD carbs. and worse its electronic carb controller(MCU), sure no lack of posts on this topic, here Search...
-
-
deadpool1 replied to the thread Evap system workaround help.the rules are simple (this system) no vacuum leaks allowed, mostly all leaks are via 2 paths normal the ISA and you right foot throttle...
-
deadpool1 replied to the thread Steering Vibration.on my jeep the last PO, put front spring shims on backwards (erasing all caster) and caster was 0 day 1 to me. saw it , wrong in and...
-
deadpool1 replied to the thread Steering Vibration.ways #2 a good shop that does chassis and alignments can do on car tire balancing. and he then grabs you says lookie here, see what bad...
-
deadpool1 replied to the thread 5 volts TPS.0.1vdc is NOTHING EVER. on jeeps or EFI. its not a jump at all it is just normal car power noise all cars made have. what pins you...
-
deadpool1 replied to the thread Help Identify firewall wire.the OP only needs a FSM and is free. it's all there to see and answer those basic questions but he is gone now so is moot point.
-
deadpool1 replied to the thread 5 volts TPS.names in the USA all names for EFI are by SAE , and are a standard here. and in 1996 many names changed, case in point CPS is now...
-
deadpool1 replied to the thread 5 volts TPS.the TPS, is mounted in such a way the TPS is spring loaded to the shaft. (TV shaft) this causes the TPS to track the TV shaft 100 %...
-
deadpool1 replied to the thread 5 volts TPS.no only the pin 2 will read wrong of the TPS was installed wrong. wires good ground never fails wires good +5v pin never fails key on...
-
deadpool1 replied to the thread 5 volts TPS.I can not answer your question, about TPS you use the wrong names, ACC ? ASE? the pins are named ground pin 1, color black/light blue...
-
deadpool1 replied to the thread 5 volts TPS.The cause of actual misfire, for sure at WOT, not just idle , not just fast right foot for only 3 seconds ,but misfires all the time...
-
deadpool1 replied to the thread 5 volts TPS.the TPS is autocalibrated when the battery is connected backup after the TPS change out (step 1 is pull neg lug first to do any...
-
-
deadpool1 replied to the thread 5 volts TPS.oh , its only misfiring. (a whole new ball of wax as we say) so THE TPS does not cause misfire at WOT, does it misfire WOT or WOT up a...
