Search results

  1. R

    What shifters should I get for both 4L60 transmission and transfer case?

    I used an NP 241C ih a supershort SYE kit. So it is very similar to the Tcase hat came out. I used a U joint that mated to the jeep driveshaft and Tcase. On the rear I had a CV shaft made up to match the SYE yoke and he jeep yoke at the other end. It really goes with the 4.8 in it!!!
  2. R

    What shifters should I get for both 4L60 transmission and transfer case?

    I got mine on Facebook marketplace from a street rodder that I had bought one and changed his mind. Check swap meets Facebook marketplace and maybe some street rod shops to see if you can find a used one or one that somebody has bought and doesn’t want.
  3. R

    What shifters should I get for both 4L60 transmission and transfer case?

    It is a tail mount shifter it bolts where the tcase adapter housing bolts onto the 4L60. It is still dark outside this morning. I wil try to get a pic and post it later Check this link and look at the tail mount shifter -TM https://lokar.com/catalog/#page=37
  4. R

    What shifters should I get for both 4L60 transmission and transfer case?

    Jeepster, You asked about the linkage on the suburban shifter and I missed answering. It was missing the linkage and I didnt like what I could find on line and the wreckers had nothing. I had to adjust the offset on the shifter bellcrank to get a better alignment to the transfer case shifter. I...
  5. R

    What shifters should I get for both 4L60 transmission and transfer case?

    I went with the transmission mounted model. I bought it in FB marketplace from a street rod builder who changed his build. I want to feel the power train through the shifter for why it’s worth. Don’t hesitate to ask questions as I made most of the mistakes that you can make. BTW you have 8...
  6. R

    What shifters should I get for both 4L60 transmission and transfer case?

    Some pics of the shifters, linkages and the stock crossmember
  7. R

    What shifters should I get for both 4L60 transmission and transfer case?

    I hae a 2006 4.8l with a 4L60 and a 241 T-case in a 92 YJ. Still working through the details but it is on the road. I used a Lokar transmission mounted floor shifter. It works well and looks good. I used a manual floor shifter out of a late 90s suburan for the transfer case. I am going to use...
  8. R

    Vortec cooling

    I did find a rad on amazon canada that gets decent reviews and it is less than $400. It took some digging but I now have a plan. Thanks
  9. R

    Rewiring YJ

    Thanks!!
  10. R

    Rewiring YJ

    I am in the process of putting a new to me harness in my YJ as the old one and fuse panel had been butchered so badly prior to me, that when I turned the ignition off with the headlights on, the wipers and heater fan would come on. It is going well, o ther than I left it too long between removal...
  11. R

    Vortec cooling

    I can make the inlet and utlet work wihout too much difficulty. There isn't a fan on this engine so will be solely electric. I am thinking I best wait and buy a proper sized rad with an integrated transmission cooler.
  12. R

    Vortec cooling

    I am in the midst of swapping a 4.8 Vortec/4L60/NP241 into my 92 YJ. It had a 2.5 with the AX 5. I am a bit tight on budget and contemplating putting the stoc rad back in with an aux transmission cooler until I have some more funds. I have searched the web till my eyes are square!! So it would...
  13. R

    Well YJ fans, I wasn’t going to do an upgrade, however.....

    I am replacing a 2.5/AX5/NP231 in my 92 YJ with a 4.8L/4L60e/NP241. I will deal with differentials at a later date. The 2.5 was just too underpowered