Search results

Has anyone found the PCB for a 94 Jeep Wrangler for the gauge cluster in the center? I cannot find one, I might have to jump the PCB and solder wire to fix one of my light blubs not lighting.

Well, I can report back and say that its now running, turns off and on with the key, check engine light comes on as well briefly as it should. The ignition switch I bought new out of the box is bad. I put the old one in after surely fixing the wiring issues with the old harness (the old ignition...

Thank you! need to figure out why no voltage now.

Thank you so much. Attached is the highlighted path I am tracing.

Well, I got it started and running to discover cav9, G50 start and run wire sends no voltage from the PCM to the ASD and Fuel pump relays. I jumped cav5 from the data link port which is G50 wire and the relays all click and get voltage. There is supposed to be 12v from ignition switch A21, there...

I am not familiar with what a stock YJ drive shaft looks like, I just assumed that it was stock. I need to stop assuming on this Jeep, seems like nothing is stock or normal on it. Below is a picture of the drive shaft. Regarding the cable for the 4 wheel drive, the red cover dry rotted and...

I'll take some pictures for sure. There is the eject button installed (lol I know people always ask about the red knob in the interior) that deletes the vacuum operated 4wheel. I am unsure if they put the kit in that allows the light to still operate without the vacuum system/switch installed...

I am that guy, haha. I have been dealing with a ton of issues on this thing. I didn't want to give up on it, but had other things pop up that took precedence for awhile. For now I am leaving the motor where its mounted, I found a decent electric puller slim fan design that will fit between the...

Thank you so much for your help. I checked the VIN and it showed it was a total swap. I assume the transmission might have been as well as from my understanding the AX-15 wasn't supplied with the 4cyl. I think you might have nailed it on the first two, I am thinking its for AC components as...

I am a pretty new Jeep owner here looking for some assistance with wiring connectors. I bought a 94 Wrangler with a 4.0L with an AX15 manual transmission, no AC, after I did some digging I found that the vehicle originally had the 4 cylinder engine so at some point a previous owner swapped the...

It originally was a 4cyl. I’ve found lots of crappy work on it so far, the entire wiring harness was a mess, I’ve had to order a new one for a YJ now I’m wondering what issues I’m going to run into with that…. Ugh.

Just feel this weld by the existing motor mount.

So I have a very strange thing going on, I am hoping someone can possibly point me in the correct direction. I purchased a 94 YJ and found it has a 4.0L i6 blocked dated to 92, previous owner did a swap it appears. The rig had a seized up electric fan on the front of the radiator, I wanted to...