Search results

  1. Sorin CNC

    LED headlights suggestions

    Thank you Chris! I will look into them.
  2. Sorin CNC

    LED headlights suggestions

    Hello everyone. I am planning on replacing the original Headlights with LEDs. Any suggestions or ProsVS Cons? I also got all new LED light bulbs for the dash lights ( green) I will replacing them at the same time along with the headlight switch. Trying to find a dash board dimmer switch but...
  3. Sorin CNC

    Hello everyone!

    Thank you so much. Slowly is getting there..
  4. Sorin CNC

    Hello everyone!

    Thank you. I got more stuff to do but I am taking a little break.. Getting old sucks..
  5. Sorin CNC

    Hello everyone!

    it has been a while since I was here. Finally got some of my parts powder coated and installed on my Jeep. More parts at the powder coating.. Finished the bumpers, trailer receivers, custom Bumperettes, LED lights and the replacement for the cheap, ugly plastic cover that used to go over the...
  6. Sorin CNC

    88 YJ "freshen up"

    Do your self a major favor and cut a fuel pump access hole so if you ever have any issues in the feature, you don’t need to drop the gas tank.. I did that on mine when I had to replace the pump.
  7. Sorin CNC

    How long should the shackle bolts (and frame bushing bolts) be?

    I have my own greasable screws. Grade 8 bolts, nylock nuts and a small cross hole through the nuts and the bolts after they were torqued for titanium wire to lock the nuts ( like in most aircraft cases). Them suckers will never come lose..
  8. Sorin CNC

    Hello everyone!

    Update on my health issue. I was in the hospital for 5 days. They found out that I had 90% blockage in my main artery of my heart. Thank God that they were able to fix it with few stents. I have been home for two days now and today was the first day back in my shop. Still not allowed to do...
  9. Sorin CNC

    Hello everyone!

    Just finished my rear bumper steps. The bumpers, trailer hitches, LED lights cans and covers are still at the powder coating shop. I have been sick for the past 3 weeks and I am scheduled to be admitted in the hospital this Sunday evening.
  10. Sorin CNC

    Hello everyone!

    I could do it. I will need some type of dimensional sketch for the basic shape, holes and hole locations. After hat, the possibilities wold be unlimited mites..
  11. Sorin CNC

    Hello everyone!

    Here is the front bumper Jeep Medalion. Made of 5/8 thick aluminum plate. All that I need to do is sand blast it to remove tool shine marks and powder coat it. The high spots will be remachined after powder coating to expose the aluminum color.. The bumpers are made out 2”X6” steel tubing that...
  12. Sorin CNC

    Hello everyone!

    My rear bumper steps/ Bumperettes are done at the powder coating shop and can’t wait to get them and recut the high spot surfaces to expose the aluminum color. They will mount on top of the rear bumper and also provide holes for the aluminum flag poles that I am making for the back bumpers (...
  13. Sorin CNC

    Hello everyone!

    All edges will have to be beveled/chamfered. Sharp corners are ugly, dangerous and get banged up quickly. Let me work on these hinges and have a working prototype first. Once I do that and make the first set I will gladly make you a set. Thanks for watching my progress on these parts. Finishing...
  14. Sorin CNC

    Hello everyone!

    Absolutely. I will need some dimensions for and holes locations. Other than that I can do it and can use your own design. I have a friend that owns Gangster chopper and I can probably can get some of the dimensions from him ( unless you have som old parts and I can use to get my dimensions from)…
  15. Sorin CNC

    Hello everyone!

    My Custom made Rear bumper steps/Bumperettes are now back from the powder coating. Can’t wait to skim cut all the top surfaces so the frame and the Jeep script shows in aluminum color. The 3 small screws is what I will use to bolt them to the bumper (5/16 stainless steel button head screws. The...
  16. Sorin CNC

    Hello everyone!

    Thanks and yes, I will take some pics and post them when I do that. Right now I am working on the new bullet hinges for the hood. I want to try them first before I chop out the hood for the louver insert. Many told me to just bolt the insert over the hood for looks but I am. It doing that.. once...
  17. Sorin CNC

    Jeep starts and idles for a minute, then sputters out

    Thanks for the input and glad to hear that you got it all worked out. Perseverance pays!
  18. Sorin CNC

    Hello everyone!

    Thank you!