Interior Door Panels

A

AmbarYJ

New Member
Joined
Nov 12, 2021
Messages
7
Location
Helena, Mt
Trying to find a little knowledge on the interior door panels for 1989 Sahara YJ. Every replacement I see is one piece, but it looks like mine are three piece. Is there a vendor who makes replacements, or just find a local to repair?

Thanks
 
What doors do you have, half door or full door? I have never seen a 3 piece panel for either that I know of. I would try taking one off to see if it is in fact 3 pieces or just appears that way.
 
  • Like
Reactions: AmbarYJ
Try taking it apart. I also have only seen one piece door panels. Usually just a big piece of thick cardboard wrapped in patterned leather or vinyl.
 
  • Like
Reactions: AmbarYJ
Thanks, it looks like three, but may be only one. They are full metal doors with little pocket on bottom. I’ll post some pics later.
 
Thanks for reply, they are full metal. I will post some photos later. These go from the top of the door, down to the bottom.
 
inner dooe lower.jpgupper door liner.jpgI finally got around to pulling off the drivers side, they are two piece. The top covers from the window down and stops just a little before the window crank. I have only seen one other reference to these type of inner liners.
 
Doesn't help much for you, but thought I would post a couple pic from when I did mine. The cardboard was rotted away. I found what I call "hard board" at lowes. It is pressed cardboard to me and is maybe 3/16 thick. Just cut out the pattern, I added a thin layer of cushion material and re-glued all back together. Also put a few stainless staples on the backside at bottom.

391258B2-620C-40B1-8997-4C0C59DBCDB7.jpeg


1765EA9D-6699-4CE7-95ED-FCBFE3BD1D77.jpeg


81D689A3-8518-4E58-A33E-C2ADEF2F4E16.jpeg
 
  • Like
Reactions: Flyer58
Top Bottom