Donkey
Reaction score
16

Joined
Last seen

Latest activity Postings Images About

    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
      I used a 1996 Dakota starter. Just make sure you get the face mount as there are two options.
    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
      The 12" and 11" clutch are the same from what I remember. At least on the Dakota. The flywheel looks right and if memory serves the...
    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
      R and D lol. I had to design it based on measurements alone. Thats a donkey design custom part there. If you need pictures or a closer...
    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
      That is correct on the ps pump. I used the stock hemi pump with an adapter to the YJ gearbox. I made a short hydraulic hose with the...
    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
      I made this post because I had to piece it together. I figured it would help if someone broke the process down. The amount of stock...
    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
      Just look at my part breakdown. You will need the slave assembly off a 90's Dakota and a new nose adapter for the AX15. All readily...
    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
      Any thing I can help with just let me know. I have about 3000 miles so far and the only issue was the clutch master. The master barely...
    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
      The 3.7 flywheel should bolt up that I know of. The 11" Dakota clutch is about what I would say is minimum though. And consider...
    • Donkey
      Donkey replied to the thread YJ Hemi conversion.
      The flywheel was out of a 07ish Dakota 4.7. Any 3.7 4.7 5.7 flywheel should work if its internal balanced 8 hole. I used the holley...
  • Loading…
  • Loading…
  • Loading…